Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 250+ Posts daveyball's Avatar
    Join Date
    May 2009
    Location
    Douglas
    Posts
    314
    Rep Power
    34

    CL7300 Registration and Banding

    Hi

    I have a CL7300, which is producing banding (all four colours) intermittently, it also failing the colour reg and fuser adjustments.
    It has ne PCU's and Devs and also the transfer belt replaced.

    Any Ideas

  2. #2
    Technical/IT Support 500+ Posts Venom's Avatar
    Join Date
    Nov 2009
    Location
    Ontario
    Posts
    764
    Rep Power
    40
    The black dev motor also drives the fuser on that...maybe fuser is binding?
    IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

  3. #3
    Technician
    Join Date
    Dec 2009
    Posts
    27
    Rep Power
    29
    Check that the transfer cleaning blade is not sticking to the belt, this is usually accompaniend by a juddering noise.
    Cheat the front door, run the machine and release the blade pressure with the lever on the cleaning unit to see if the problem stops.
    A new blade could be required (p/no. AD042091).

  4. #4
    Trusted Tech 50+ Posts GhostInTheMachine's Avatar
    Join Date
    Feb 2010
    Location
    Arkansas
    Posts
    88
    Rep Power
    29
    Also you might have to adjust fuser speed. If the fuser speed is faster or slower than the transfer belt speed the speed shift going into the fuser can cause this condition.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here