Thanks:
0
Likes:
0
Dislikes:
0
-
Jamming at b2
Just to let you all know that on stripping the whole feed and reg section down found major dev spill all in feed head 1 in all the bearings and gears.Have ordered new feed heads and dev unit as dev is coming out the back of the unit.
Thanks to all who posted help..........
-
Field Supervisor
500+ Posts
- Rep Power
- 0
I'll bet you,ve dev on your gears or that reg sensor is filthy(especially if it has never been cleaned). It's under the dev unit. Slide out the dev, 2 screws 1 front 1 back (you'll need a stubbie) and lift the plat over to the left and you'll se a photo sensor covered in paper dust.
Grant me the serenity to accept the things I cannot change.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks