I have a Ricoh AP3800 copier with error message SC552 (pressure roller warmup). I have replaced the fuser and get the same message! What can I do now? Thanks!
I have a Ricoh AP3800 copier with error message SC552 (pressure roller warmup). I have replaced the fuser and get the same message! What can I do now? Thanks!
Update the firmware to the latest versions BEFORE you look to replacing the BICU PCB.
Warm-up timing was changed to prevent SC552 mis-detection from engine B1.25 onwards.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
BTW there is an SC reset you need to execute in SP mode for fuser codes.
I have seen many of these machines with paper in the connector , so many i bought a dental pick to get them out , and don't forget the SC reset .
Bookmarks