Im getting a jam code58 vertical transport jam it has a bridge and 790 finisher its kicking my butt its only has 120k on it > any ideas
Thanks: 0
Likes: 0
Dislikes: 0
Im getting a jam code58 vertical transport jam it has a bridge and 790 finisher its kicking my butt its only has 120k on it > any ideas
It is saying the 1st v-xport sensor is not turning off. I would start by blowing out the sensor or just replacing it.
Use the input check SP5803-007 bit 2
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
I would replace the feed clutch, relay clutch, and reg clutch as a set. If that didnt work, then i would replace the sensor.
Yeah I would guess a relay clutch, clutches fail way more than sensors. Won't hurt to blow out the sensors though.
Reply With Quote
Bookmarks