any help?
any help?
Found this in the knowledge base....
Copied images are faint (all colors). How can I fix this?
Is the Toner Saver Mode is set to ON? (Default: OFF)
Confirm the Toner Saver setting by printing the Configuration Page
Follow these steps:
- Press any menu key.
- Press the [][] keys to select [Reports Print], and then press the [OK] key.
- Press the [][] keys to select [Configuration Page], and then press the [OK] key.
The problem is resolved by setting the Toner Saver to [Off] again.
Procedure: In Menu -> Machine settings -> Toner Saver Mode, change the setting from [On] to [Off].
- Press any menu key.
- Press the [][] keys to select [Machine Settings], and then press the [OK] key.
- Press the [][] keys to select [Toner Saver Mode], and then press the [OK] key.
- Set the [Toner Saver Mode] to [Off].
That was it. Thanks! Knowledge is power!
Bookmarks