Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Field Supervisor 500+ Posts Vulkor's Avatar
    Join Date
    Jun 2009
    Posts
    942
    Rep Power
    40

    Unhappy Aficio 270/ Savin 9927dp

    This is getting to be a pretty old machine, but I thought I'd throw this question out there and see if someone could help in the troubleshooting process.

    Savin 9927 No Feed from Tray 1
    Tray 2 works great.

    Swapped the following components from tray 2 to tray 1 in hopes of repair.
    Took tray paper sensor (paper height Sensor?) hangs above tray.
    Feed Clutch.
    Lift Motor.
    Friction pad
    Feed Roller

    Even pulled out and inspected tray 1 feed unit. A pain in the ass cause of that rear busing I might add.
    The Only thing I could think of is maybe one of those sensors in the back are bad. But the motor lifts to the correct location. I see the clutch attempt to feed but it fails.

    Any suggestions??

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Nov 2008
    Posts
    121
    Rep Power
    33
    What happens if you swap tray 1 + 2 around?

  3. #3
    Field Supervisor 500+ Posts Vulkor's Avatar
    Join Date
    Jun 2009
    Posts
    942
    Rep Power
    40
    Cannot use tray two in the the tray one spot on this model. Most of the 22-27 Cpm models are this way.

  4. #4
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108
    I think the springs in the back may be slightly weak, just not pulling the tray high enough to feed paper. Swap them and the sensor assembly from tray 2 and see what happens.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

  5. #5
    Field Supervisor 500+ Posts Vulkor's Avatar
    Join Date
    Jun 2009
    Posts
    942
    Rep Power
    40
    ok TonerMunkeh that could be a possibility I think. Thanks for suggestion. Never thought of weak springs. Seen plenty of Broken springs before.

  6. #6
    Field Supervisor 500+ Posts
    Aficio 270/ Savin 9927dp

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45
    Try it, time ago i beefed up a Spring with a strong Rubber Band, i admit, its a "quick and dirty fix" but works until now
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  7. #7
    Field Supervisor 500+ Posts Vulkor's Avatar
    Join Date
    Jun 2009
    Posts
    942
    Rep Power
    40
    Ingenious Fix Herrmann, but rubber bands aren't that common around here. Maybe in the fruit and vegetable isle.

  8. #8
    Field Supervisor 500+ Posts Fearless V K's Avatar
    Join Date
    May 2007
    Location
    Redding, California
    Posts
    621
    Rep Power
    41
    Use your finger to put extra pressure on the tray lift mechanism from the rear of the machine. If it feeds, then you know for sure you don't have enough lift pressure.check the lift coupling for cracks. Reduce lift motor reverse time (SP modes) to increase spring tension.
    Don't take that toner with me!

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Nov 2008
    Posts
    121
    Rep Power
    33
    Quote Originally Posted by Vulkor View Post
    Cannot use tray two in the the tray one spot on this model. Most of the 22-27 Cpm models are this way.
    I have swapped the trays of an AF220 just last week. Maybe our models are different from yours.

  10. #10
    Field Supervisor 500+ Posts Vulkor's Avatar
    Join Date
    Jun 2009
    Posts
    942
    Rep Power
    40
    Very odd, because most of the Savin 9922/9927 Savin 2522/2527 the Bottom tray will not go all the way into the top tray slot.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here