This is getting to be a pretty old machine, but I thought I'd throw this question out there and see if someone could help in the troubleshooting process.
Savin 9927 No Feed from Tray 1
Tray 2 works great.
Swapped the following components from tray 2 to tray 1 in hopes of repair.
Took tray paper sensor (paper height Sensor?) hangs above tray.
Feed Clutch.
Lift Motor.
Friction pad
Feed Roller
Even pulled out and inspected tray 1 feed unit. A pain in the ass cause of that rear busing I might add.
The Only thing I could think of is maybe one of those sensors in the back are bad. But the motor lifts to the correct location. I see the clutch attempt to feed but it fails.
Any suggestions??
Bookmarks