Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jan 2009
    Location
    Lusby, MD
    Posts
    142
    Rep Power
    33

    MPC 4000 thermastat

    Have any of you found a cost effective way to replace this thermostat rather than the entire coil assembly in a MPC4000?
    Apparently there is a “regular” thermostat within the coil assembly, which for some reason is “glued” into place and not accessible

  2. #2
    Field Supervisor 500+ Posts Vulkor's Avatar
    Join Date
    Jun 2009
    Posts
    942
    Rep Power
    40
    Haven't had to replace the Thermastats on these new units. They aren't a PM item. Is yours causing SC codes or tearing belt?

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Aug 2008
    Location
    ACT 2620
    Posts
    114
    Rep Power
    33
    ive replaced a couple of coils and thought the same question.There really is no way around it the thermostats arent even listed as a seperate part.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here