Thanks: 0
Likes: 0
Dislikes: 0
Problem solved while I was on vacation. Turns out that the main board that was sent to us from another machine also had the same problem. Ricoh sent us another complete machine to try parts out, and the main board from that machine worked fine.
Thank you all for your replies.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
hi,
have you tried to calibrate the scanner? If all of the things that said above are already been done. The last sort of act is try to do Gen. Init. then reboot the machine and try to test print(setup). check if still blank.
Anyone who has never made a mistake has never tried anything new.....A.E.
Oops sorry, not read the last post....
One thing more, is only the mainboard have the problem?
Anyone who has never made a mistake has never tried anything new.....A.E.
Apparently yes. When I swapped the first mainboard (the one I didn't know was broken) the problem didn't go away. But when my colleague swapped the second mainboard, the machine worked okay.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Thanks for the reply...
Anyone who has never made a mistake has never tried anything new.....A.E.
These machines are horrible little things. I've had one that sat there and said "Waiting File", did nothing else until I changed the main board. What a bitch.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
These m/c's are the 1224s little brother - burn the bast*rds all of em!
Posting Permissions
Reply With Quote
Bookmarks