Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: SR861 Booklet

  1. #1
    Technician Andy21's Avatar
    Join Date
    Apr 2008
    Location
    Ljubljana
    Posts
    21
    Rep Power
    20

    Angry SR861 Booklet

    Hi guys,
    i have a problem on SR861 Booklet Finisher. When it staples on booklet type some of paper is not settled and some are. I allready cleaned all the sensors and rollers but I steel did not solve the problem.
    Can somebody please help me!


  2. #2
    Technician
    Join Date
    Jun 2010
    Posts
    11
    Rep Power
    15
    Little brief info to act on.
    Is paper when stapled not nice stacked ?
    How about in 1 staple mode ?


  3. #3
    Technician Andy21's Avatar
    Join Date
    Apr 2008
    Location
    Ljubljana
    Posts
    21
    Rep Power
    20
    DCW98 thanks to your reply,
    paper is stacked nice and in 1 staple mode works ok. I have problem only with booklet mode, some times the paper is not fold in the midle. I tried to fix the problem with SP6-113 but whithout any luck.


  4. #4
    Impulse Drive Engineer 250+ Posts CableGuy's Avatar
    Join Date
    Oct 2008
    Location
    Portsmouth via Cape Town
    Posts
    414
    Rep Power
    23
    Had a problem on one of these a little while ago where the first piece of paper fed into the staple tray would get wedged between the belt and the feed out belt pawl, this happened due to the mylar was bent out of position. This allowed the paper to wedge itself in there causing the front/rear cover to be offset to the inner pages of the booklet. The booklet was folding in the correct place, but the front page was out of position.

    Not sure if this is what you have happening there.....


  5. #5
    Technician
    Join Date
    Jun 2010
    Posts
    11
    Rep Power
    15

    Gear

    Good cas of worn out "Gear Paper Crimp: Drive: Rear"
    Replace the front and rear one + both link shafts.

    If you want more info i have pictures of it.
    Email me at: DCW98@live.nl


  6. #6
    Technician Andy21's Avatar
    Join Date
    Apr 2008
    Location
    Ljubljana
    Posts
    21
    Rep Power
    20
    Thank you guys for your reply, I will try to fix the problem.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here