i have a sr4000 on a mp7500 that wont always corner staple what i mean by wont staple is it staples but misses the paper for some reason this is very intermitant any advice please
i have a sr4000 on a mp7500 that wont always corner staple what i mean by wont staple is it staples but misses the paper for some reason this is very intermitant any advice please
usually its the positioning roller belt out of position or the stalk feed out belt holder is off position,most common,hope that helps
Also too much paper curl
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Check for cracks in any guide mylars at the bottom of the stack area. Have had a similar problem on SR5000's but normally only causws the top sheet not to stack.
Bookmarks