Hello Everyone,
I was wondering on a Savin C3030 if the customer is able to calibrate the touch screen by themselves or is it something that I would be able to walk them over the phone with. Thanks in advance.
Brian
Hello Everyone,
I was wondering on a Savin C3030 if the customer is able to calibrate the touch screen by themselves or is it something that I would be able to walk them over the phone with. Thanks in advance.
Brian
I've been able to walk some through it and others I wouldn't even try. It's not in user tools.
Anyway, to calibrate the touch screen:
Press Reset (yellow key)
Press 1
Press 9
Press 9
Press 3
Press Stop (red key) 5 times
Now you should see the touch panel menu. I believe it is #1, the top left button to calibrate. You basically touch 2 circles and hit enter or #. Probably a good idea to use a pen or something with a fine point. GL
Thanks for the help. On my way out there now.
On this model the touch screen is more than likely about to fail if the calibration is drifting.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
But, on the plus side, the new screens only cost £0.01!
Bookmarks