Aficio 1232C, Z folds and jams at registration

[xeroid]

Cleaned the reg roller, blew sensors and inspected registration area. All looks good. Machine has 100K on it and I am not certain of where or what is the paper loop adj on this machine if any. Any expertise to lend is appreciated

[Jomama46]

7507 will give you the history of the jam locations and 5804-11 is the output check for the reg clutch

[xeroid]

7507 will give you the history of the jam locations and 5804-11 is the output check for the reg clutch

7507 shows the last ten all to be 063 jams.

[Jomama46]

paper stays at the registration sensor

Did you test the reg clutch? You should be able to hear it click.

[Jomama46]

Also you can turn on the fuser motor and the reg clutch to see if the roller is turning.

[Smee]

Most clutches I have seen tend to be intermittant, so they generally work in the output modes.

I think its a pretty good chance one of them is knackerd so Id just replace them. Think there is 3 from memory.

[alliance1]

replace both registration clutch and relay clutch right below it.