Cleaned the reg roller, blew sensors and inspected registration area. All looks good. Machine has 100K on it and I am not certain of where or what is the paper loop adj on this machine if any. Any expertise to lend is appreciated
Cleaned the reg roller, blew sensors and inspected registration area. All looks good. Machine has 100K on it and I am not certain of where or what is the paper loop adj on this machine if any. Any expertise to lend is appreciated
7507 will give you the history of the jam locations and 5804-11 is the output check for the reg clutch
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Did you test the reg clutch? You should be able to hear it click.paper stays at the registration sensor
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Also you can turn on the fuser motor and the reg clutch to see if the roller is turning.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Most clutches I have seen tend to be intermittant, so they generally work in the output modes.
I think its a pretty good chance one of them is knackerd so Id just replace them. Think there is 3 from memory.
replace both registration clutch and relay clutch right below it.
Bookmarks