Service manual for NRG3502

[Marius77]

Hello,

I have a NRG3502 and now show me the eror SC541

Could somebody help me with a service manual for NRG3502

[Yetno.0103]

SC 541
=Symptom=

Fusing thermistor open
The fusing temperature detected by the thermistor was below 7°C (44.6oF) for 5
seconds, or 2 seconds after reaching 45oC (113oF) the temperature does not
reach an additional 15oC (59oF) after checking five times at 0.1 intervals.

=Possible Cause=
Fusing thermistor disconnected Fusing thermistor connector defective
Fusing thermistor damaged or warped Fusing temperature –15% less than the
standard input voltage

=sOLUTIONS =
Enter SP mode, and then turn the main power switch off and on.

sent me email yetno.aceh@gmail.com

[JustManuals]

Ahh, another 1st poster and he needs something, what a surprise!

[RebelPhoenix]

Hello dear marius77,

If you are give me the e-mail adress with pm I will sent this service manual free.

[Marius77]

Hello RebelPhoenix,

mariusandrei77@gmail.com

Thanks!