Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 0
mpc 5000 connectivity
hi guyz,please help on this,i have a client who i installed the postscript as he uses a mac.
operating system,has refused to work and i dont know what to do.
he's os is mac 10.6 he claims when he goes around the world the other products work with
his laptop,any idea on what i can do?will appreciate.
-
What exactly isn't working?
Does the machine have a PostScript chip in it? Without it, the driver is useless.
-
Senior Tech
100+ Posts
- Rep Power
- 0
yep the postscript is installed,the printer says its waiting for the job and next it goes blank
-
Technician
- Rep Power
- 29
check to see if usercodes are enabled
-
Senior Tech
100+ Posts
- Rep Power
- 0
i did not enable them and by the way on microsoft is printing ok only on mac 10.6
-
How was the printer setup on the Mac?
Did they run the installer program on the CD?
The installer program on the CD only installs the Mac driver. They still have to add a printer from the print center, which should have the Ricoh driver as an option once they ran the install program off the CD.
I've had the best luck adding LPD printers and then using the ip address and "print" for the queue name.
-
Senior Tech
100+ Posts
- Rep Power
- 0
The driver was run from the c.d and the printer added from the print center, however upone completion of installation you could ping and get back a reply from the printer. so we decided to download the printers drivers from the ricoh website this being the latest drivers for mac o.s 10.6 but upon running the installer still the printer was unable to print. Any ideas as to overcome this issue.
regards
-
Senior Tech
100+ Posts
- Rep Power
- 35
Try logging into the web-interface and check the PS setting in printer under the configuration link. If the "Data Format" is in "Binary Data", try changing it to "TBCP".
That fix the same kind of issue I had.
Good Luck
-
Senior Tech
100+ Posts
- Rep Power
- 0
thanks copyman20,will try and will let u know
-
Senior Tech
100+ Posts
- Rep Power
- 0
Is AutoContinue enabled (usually set to Immediate)?
If so, reboot the MFD ask the user to send a job the check the printer error log.
Error code 91 would indicate that a mismatch has occured between the configuration of the device and those of of the application and driver and the job has been cancelled by the MFD.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks