Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
  1. #11
    Technical/IT Support 500+ Posts Venom's Avatar
    Join Date
    Nov 2009
    Location
    Ontario
    Posts
    764
    Rep Power
    40
    Another vote for Toner Filter on dev unit and make sure to clean the doctor blade
    IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

  2. #12
    Technician
    Join Date
    Sep 2010
    Location
    isb
    Posts
    26
    Rep Power
    28
    its a service problums you must check you magnet roller and clean with thiner or patrol you must solve your problum

  3. #13
    FORMER Techie 1,000+ Posts tcs04's Avatar
    Join Date
    Apr 2009
    Posts
    1,184
    Rep Power
    43
    Quote Originally Posted by nqk View Post
    its a service problums you must check you magnet roller and clean with thiner or patrol you must solve your problum
    !!!!! IF there is toner on the roller just use the old dev as an abrasive before changing it!!!!!!!!!!

    Doctor blade would cause stripes, check the drum earth!!! if this is bad you WILL see the copy going grey as the process control will be buggered! The drum discharges through the shaft bearing and these dry out and increase resistance preventing the laser writing the full density.

  4. #14
    Trusted Tech 50+ Posts Lotec's Avatar
    Join Date
    Feb 2008
    Posts
    97
    Rep Power
    33

    Try with Ricoh parts only.. or Katun only.

    I would try to use Ricoh parts, toner and drum and see if that does the trick. We have plenty of those machines out - and they work really good. We only use original Ricoh toner/dev/drum etc and it manage 300k without any problems. Some does 600k between each dev change (but prints tend to get grey towards the end of course).
    We used Katun on other machines before, and usually it worked OK - but once in a while there was combinations that didn't work at all or worked bad over time. Sometimes the problem would come after a firmwareupgrade too. So try the original stuff and see it it does the trick. Or use Katun on all parts and see it they are a good match . .

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here