Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Jun 2010
    Posts
    11
    Rep Power
    0

    Ricoh Aficio 3035/Nashuatec DSm735

    Can anyone help please.I have a m/c with error Sc542 what can cause this and how do you reset the code if fuser related,If this is via service mode how do you get into service mode on these m/c's ?
    Thanks in advance,
    CW

  2. #2
    Trusted Tech 50+ Posts Yetno.0103's Avatar
    Join Date
    Jan 2009
    Location
    Banda Aceh
    Posts
    63
    Rep Power
    0
    SC 542

    # Error Type #
    A

    # Symptom #
    Fusing temperature warm-up error

    #Possible Cause#
    The fusing temperature does not reach the fusing standby temperature of 45oC
    (113oF) within 9 seconds [for the B264 (35 cpm)]/14 seconds [for the B265 (45
    cpm)] after switching on the main power or closing the front cover, or 40
    seconds after reaching 50oC the fusing roller does not reach warm-up
    temperature.

    # Troubleshooting Procedures #

    • Fusing lamp defective
    • Poor fusing unit connector
    • Thermistor warped or broken
    • Thermostat has tripped
    • BICU defective
    • Power supply board defective

    # Reset Prosedure #
    Enter SP mode, and then turn the main power switch off and on.

    # Entering and Exiting SP mode #
    1. Press the Clear Mode key.
    2. Use the keypad to enter “107”.
    3. Hold down Clear/Stop for at least 3 seconds.
    4. Enter the Service Mode.

  3. #3
    Field Supervisor 500+ Posts
    Ricoh Aficio 3035/Nashuatec DSm735

    totoro's Avatar
    Join Date
    Apr 2008
    Posts
    569
    Rep Power
    41
    Usually have this problem on machines that have bad or interrupted power. Clean and adjust the thermistors and follow Yetno.0103's instructions for reset. If that doesn't work then change the thermistors.

    # Reset Prosedure #
    Enter SP mode, and then turn the main power switch off and on.

    # Entering and Exiting SP mode #
    1. Press the Clear Mode key.
    2. Use the keypad to enter “107”.
    3. Hold down Clear/Stop for at least 3 seconds.
    4. Enter the Service Mode.
    Totoro

  4. #4
    Technician
    Join Date
    Sep 2010
    Location
    isb
    Posts
    26
    Rep Power
    28
    press yellow key
    dial 107
    hold c for 5 sec
    click copy sp mode
    of your copier and again on aftar few sec

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here