Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Nov 2008
    Location
    freeport, Illinois
    Posts
    78
    Rep Power
    32

    ricoh 1055 scanner slams

    aarrgghh..... the scanner slams into home position and then i get sc126. i replaced 1) the scanner motor 2)the mcu 3)the home position center. i also checked the scanner pulley screws. please help. thanx in advance.

  2. #2
    Service Manager 1,000+ Posts
    ricoh 1055 scanner slams

    teebee1234's Avatar
    Join Date
    Jul 2008
    Location
    Atlanta, GA
    Posts
    1,671
    Rep Power
    58
    Have you tried an input check to determine that the home position sensor is changing state? Also, if you do an output check on the scanner motor does it still slam?

  3. #3
    Vacuum Cleaning Expert 1,000+ Posts iMind's Avatar
    Join Date
    Mar 2008
    Location
    File not found
    Posts
    1,116
    Rep Power
    45
    one simple question, did you do the auto ajust scanner motor timing in sp mode. after done the machine should give you a message ajust successful or failed. SP "5.XXX.X"
    We can all Win, but at the end we all loose. Save the greyhound

  4. #4
    Service Manager 250+ Posts msaeger's Avatar
    Join Date
    Sep 2008
    Location
    Minneapolis, MN
    Posts
    335
    Rep Power
    35
    Scary when that happens ! I remember the old Aficio 700 doing that.

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Nov 2008
    Location
    freeport, Illinois
    Posts
    78
    Rep Power
    32
    I cant seem to find the sp for that in the manual... I remember having the problem before several years ago and it seems like i had to run that sp. Now since im getting older and my brain doesnt function as well as it used to, I cant for the life of me remember which one it was. Does anyone know what sp number it is.
    Thanks again for all the help

  6. #6
    Technician
    Join Date
    Sep 2010
    Location
    isb
    Posts
    26
    Rep Power
    28
    i got this problum in hamdard university you must change board which is install near ccd

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here