Have you printed the 5990-004 report? Where are the original jams indicate history? That will tell you which sensor is having a problem.
Then clean and test it.
Have you printed the 5990-004 report? Where are the original jams indicate history? That will tell you which sensor is having a problem.
Then clean and test it.
Ricoh & Microsoft may pay the bills but Un*x saves my ass every day.
MCSE/CCNE/ENS and other crap...
Was there ever a solution found for this? I have one that runs LEF all day long with no troubles, but SEF jams every 3rd or 4th original jam code of 005.
I had the one way bearing of the df Belt roller slipping. I scratched the surface of shaft and cleaned bearing with alcohol. I didnt have one to replace it or i would have but it worked. Stopping at secondary rollers intermittent.
Izzy
Bookmarks