hi guys been having a sc 552 when reset it works for some time then reappears,
is it something to do with thermistors or thermofuse,the manuals don't highlight the code,
regards
hi guys been having a sc 552 when reset it works for some time then reappears,
is it something to do with thermistors or thermofuse,the manuals don't highlight the code,
regards
Fusing thermistor error 2
The end thermistor ( contact type ) is : bent, damaged, or out of postion. I always change both thermistors when I have a problem with one of them.
Totoro
thanks totoro
3rd plus shim the fuser drawer connector about 2mm out.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Bookmarks