Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 29
I change the saftey switches also sync board, i modify/reset laser pitch, but probably is the LD unit defective.
-
Technician
- Rep Power
- 0
maybe yes and no, try to clean or spray some contact cleaner on the ribbon wires and its connector on the LD board. it might do a trick.
-
Technician
- Rep Power
- 0
and if you want to throw the machin to the window make sure it hits in my place i would be happy to catch it hehehehe
-
Trusted Tech
50+ Posts
- Rep Power
- 29
Thx i will try with spray too last chance.
-
Technician
- Rep Power
- 0
please post if anything happen. good or bad. so we can all learn and help
-
Trusted Tech
50+ Posts
- Rep Power
- 29
Nope nothing help LD unit is defective.
-
Technician
- Rep Power
- 0
well there is a way to fix the LD anyway it's worth a try. un solder the LD on the LD board. remove screw and detach the LDs and clean them. toner particles get inside and this causes the SC 322/326. there's a prizim like mirror inside be sure to observe the way you detach them, after cleaning resolder them and try if this work. anyway you have said it is defective.
-
Trusted Tech
50+ Posts
- Rep Power
- 29
I allready did that so it is Burned.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks