Aficio 2035e problems "Used Toner Bottle Full"

[cbr600]

I change the saftey switches also sync board, i modify/reset laser pitch, but probably is the LD unit defective.

[Joel]

maybe yes and no, try to clean or spray some contact cleaner on the ribbon wires and its connector on the LD board. it might do a trick.

[Joel]

and if you want to throw the machin to the window make sure it hits in my place i would be happy to catch it hehehehe

[cbr600]

Thx i will try with spray too last chance.

[Joel]

please post if anything happen. good or bad. so we can all learn and help

[cbr600]

Nope nothing help LD unit is defective.

[Joel]

well there is a way to fix the LD anyway it's worth a try. un solder the LD on the LD board. remove screw and detach the LDs and clean them. toner particles get inside and this causes the SC 322/326. there's a prizim like mirror inside be sure to observe the way you detach them, after cleaning resolder them and try if this work. anyway you have said it is defective.

[cbr600]

I allready did that so it is Burned.