Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts Imsdal's Avatar
    Join Date
    Aug 2009
    Location
    Anderstorp
    Posts
    104
    Rep Power
    18

    Ricoh CL3100 (Gestetner 7417)

    This machine show error SC 486.
    I know that in the service manual it says BK solenoid error. Now I have clean the BK solenoid but the same problem remain, what is the next step change the main board or to change the drum?
    Does anybody have a tip for this issue.

    Sincerely David



  2. #2
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,205
    Rep Power
    72
    You're going to hate this. The only way of curing SC486 on these machines is to replace the entire main drive unit. I've had this fault a few times and this, unfortunately, is the only thing that sorts it. Part number is G139 0812. Put at least 3 hours aside for fitting it, you have to strip the shit out of the machine.

    Du kommer att hata det. Det enda sättet att bota SC486 på dessa maskiner är att ersätta hela huvudfacket drivenheten. Jag har haft detta fel ett par gånger och detta är tyvärr det enda som sorterar den. Del nummer är G139 0812. Sätt minst 3 timmar reserverats för monteringen måste du remsor skiten ur maskinen.

    Computers are serious tools, Michael!

  3. #3
    E Winter
    Guest
    You're going to hate this. The only way of curing SC486 on these machines is to replace the entire main drive unit. I've had this fault a few times and this, unfortunately, is the only thing that sorts it. Part number is G139 0812. Put at least 3 hours aside for fitting it, you have to strip the shit out of the machine.
    We had a few CL3xxx in the field and most of them did way too much trouble. Streaking from the PCUs, faulty toner supply and problems with the drive unit. Fortunately the price for tha parts+work are getting very high when it comes to an issue like that. I would recommend the customer to use this money for a new machine like an SPC420 wich comes with less potencial issues^^


  4. #4
    Technician
    Join Date
    Nov 2010
    Location
    Atlanta, GA
    Posts
    21
    Rep Power
    15
    Quote Originally Posted by TonerMunkeh View Post
    You're going to hate this. The only way of curing SC486 on these machines is to replace the entire main drive unit. I've had this fault a few times and this, unfortunately, is the only thing that sorts it. Part number is G139 0812. Put at least 3 hours aside for fitting it, you have to strip the shit out of the machine.
    You are SO RIGHT! It's like getting beaten to death with a bag of oranges. Horrible task! If you have never done this before, get the digital camera out and take lots of pictures. I think I can do it in about an hour now if I swear really fast. It still sucks though.


  5. #5
    Service Manager 1,000+ Posts
    Ricoh CL3100 (Gestetner 7417)

    teebee1234's Avatar
    Join Date
    Jul 2008
    Location
    Northville, MI
    Posts
    1,669
    Rep Power
    46
    The times I've seen this problem arise, our district manager would ok just replacing the whole printer if it was under service. I never saw the numbers, but apparently it was cheaper then the parts and labor cost to repair.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here