Got a ricoh 2045e with the gray background when copying. I can still see the copied original image but everything is gray around. The problem comes and goes.
Any suggestions?
Thank you all.
Got a ricoh 2045e with the gray background when copying. I can still see the copied original image but everything is gray around. The problem comes and goes.
Any suggestions?
Thank you all.
what happens, if you print out the counter page? does it look good?
If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!
Basic question...how many copies since the developer was last changed? Drum?
this sounds like PM time to me. clean and rebuild the pcu, change the developer, making sure to thoroughly clean the mag roller, and check the fuser, and possibly rebuild it at the same time. also, empty the waste toner from the transfer unit and replace the transfer belt and blade.
if it comes and goes it could be a grounding problem with the drum or dv. Could also be due for a pm
Hi Guys,
Thanks for the suggestions, I think the machine needs PM for sure. What are the codes for the PM? Is it just the DV and the Drum + Blade?
THX.
2045psg.pdf
here is the product support guide which should give you all of that information.
What is the procedure for the pm on this machine?
Thank you.
What's your mag roller & Dev seal like, try cleaning any build up and replace the seal if it is curled upwards this can scrap the patch that is developed on the drum and cause all sorts of toning related problems.
Cheers
Vasco
Bookmarks