Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member
    Join Date
    Nov 2010
    Posts
    4
    Rep Power
    0

    MP5000B with SC 221

    Hi everyone!
    MP5000B SC 221 machine errors, please help me!
    Thank verry much!


  2. #2
    Technician
    Join Date
    Nov 2010
    Location
    Atlanta, GA
    Posts
    21
    Rep Power
    15
    I only have the description, not seen this before on that model, good luck!

    Laser synchronizing detection error: start position LD1
    The laser synchronizing detection signal for the start position of the LDB is
    not output for two seconds after LDB unit turns on while the polygon motor is
    rotating normally.
     Worn out LD

    
    Damaged LD harness

    
    IPU defective





  3. #3
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    nairobi
    Posts
    221
    Rep Power
    0
    copy data security unit is not set properly or not the right type,you can disable your authentification codes and switch your machine of and on,
    gud luck


  4. #4
    Senior Tech 100+ Posts verderacer's Avatar
    Join Date
    May 2008
    Location
    Sunny Arizona
    Posts
    158
    Rep Power
    21
    I would think it's your sync detector board. On previous generations they would commonly go out...

    Ricoh & Microsoft may pay the bills but Un*x saves my ass every day.
    MCSE/CCNE/ENS and other crap...

  5. #5
    Junior Member
    Join Date
    Nov 2010
    Posts
    4
    Rep Power
    0
    thanks everyone
    I've read through the instructions, but still not fix it.
    I phoned the supplier, they said, is because polygon motor, but in the encoding erros are reported as "SC221: Scan Length Error Detection".
    What's Scan length?
    Thank you verry much!
    (Sorry about my English)


  6. #6
    Service Manager 1,000+ Posts
    MP5000B with SC 221

    teebee1234's Avatar
    Join Date
    Jul 2008
    Location
    Northville, MI
    Posts
    1,669
    Rep Power
    46
    The scan length is the sweep across the drum of the laser beam (enabled by the rotating mirror). When the beam hits the sync detector, that lets the machine calculate the start timing of the laser. So an sc221 would indicate that the detector did not see the beam even though the mirror is rotating.
    FYI, your english is fine...


  7. #7
    Junior Member
    Join Date
    Nov 2010
    Posts
    4
    Rep Power
    0
    Thanks for help!
    I can't fix it! Please help me!


  8. #8
    Technician Leonh's Avatar
    Join Date
    Jul 2010
    Location
    johannesburg,gauteng
    Posts
    11
    Rep Power
    16
    hi.what the manual says:
    The laser synchronizing detection signal for the start position of the LDB [K] is not output for two seconds after LDB unit turns on while the polygon motor is
    rotating normally.Have u tried replacing the ldb?
    1. Check the connectors.
    2. Replace the laser-synchronizing detector.
    3. Replace the LDB.
    4. Replace the BICU.



  9. #9
    Junior Member
    Join Date
    Nov 2010
    Posts
    4
    Rep Power
    0
    Thanks everyone for the help!
    After cleaning up the Optical box and replace the polygon motor, it was normal!
    Expected to be used for a long time!


  10. #10
    Junior Member
    Join Date
    Mar 2015
    Posts
    2
    Rep Power
    0

    Re: MP5000B with SC 221

    Quote Originally Posted by hthhus View Post
    Hi everyone!
    MP5000B SC 221 machine errors, please help me!
    Thank verry much!
    HI you may only have a toner spill as the ld unit sits below the toner hopper I have had this problem before and I vacuumed out the laser section and it's bee ok since.

    Regards
    phil


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here