Nashuatec DSC 332 colour our of position

[Llama God]

Print a colour test pattern from printer SP and see how the alignment is there. Also, try the colour registration adjustment in User Tools - Maintenance and SP5993-002 for the line adjustment.

I'd also check the condition of the transfer unit, this may need servicing.

If the colour test pattern is out, can you scan it so that we can see the issue? The same goes for the calibration pages.

Ta

[copyalbania]

Hello Llama,

I just did the sp5993-002 and the result is failed.
In the result SP5993-007 the result is 070707
What does it mean?
When i try to do maintenance from the menu it prints OK but it says scanning failed!!

???

[tinnyjay]

Hello to everyone,

I have e nashuatec dsc332 that all color are moved and not in position.

I try to print out the SC-values and input all the changed ones to default but when i inputted all 2001 values of the SC ( charged bias ) and restarted the machine, after the machine made the warm up cycle it said in the dispaly colour adjusting and then a code, SC 385, and it clears with a restart of the machine.

But the next time i restart the machine and i make color copies it moves the colors.

WHAT SHOULD I DO?

IF ANYONE HAS ALSO A SERVICE MANUAL PLEASE HELP!!

You should talk to Mondi

[copyalbania]

No SPAM

VIRUS ALERT MONDI

[tinnyjay]

No SPAM

VIRUS ALERT MONDI

Hahahahahahah
you're great

[Llama God]

Hello Llama,

I just did the sp5993-002 and the result is failed.
In the result SP5993-007 the result is 070707
What does it mean?
When i try to do maintenance from the menu it prints OK but it says scanning failed!!

???

SP5993-007.pdf

[Llama God]

Sorry, try that again!

SP5993-007.pdf

[wilbert.c]

same too me

[khattab.al.masry]

Read the following attachment file:
is very useful to help you i faced the problem and follow the steps and solved
Hint: Thanks mr. Eric 1968 who shared this file.