Quote Originally Posted by Smee View Post
Yep....Im with Wishbone.....the lead edge margin needs to be larger. The toner on full bleed cover sticks to the rollers and wraps as there isnt any strippers, just that useless metal plate. Problem is it offsets the image on the page but there isnt any other fix.

Do a skyshot and keep changing the lead edge margin in the SP modes until it dosnt wrap in the fuser.

This is a real common problem for us....every MPC4000 / 5000 does this on full bleed colour as far as i know and this is the only fix. Proper strippers would sort it.

UP For this. This common problem here too for about 100+ MPC4000/5000. Adjust Leading Edge Value plus test print, resolves the problem. Factory side should implement strippers for the fuser used in this range.