MPC3500 J025

[CopyBats]

Thanks for the replies guys; Luckily I got it sorted the next day!

It was a one-way-bearing near the top & back side of the duplex unit that was just slipping a bit. Couldn't feel it slipping when I tested it with my hand but throught I'd clean it in any way and that fixed it...

Still relevant today. Had a MP C4501 duplex jamming today. Came across your post and gave it a try. Thanks !

[Phil B.]

Still relevant today. Had a MP C4501 duplex jamming today. Came across your post and gave it a try. Thanks !

well kinda relevant .. thread only 9 years dead thread ... totally different machine.

[ennadhe]

Thanks for the replies guys; Luckily I got it sorted the next day!

It was a one-way-bearing near the top & back side of the duplex unit that was just slipping a bit. Couldn't feel it slipping when I tested it with my hand but throught I'd clean it in any way and that fixed it...

Hello sir, hope you are well, I am having this kind of issue with MP C5502, done everything just like you did except about this bearing you mention. If you don't mind, may I know the exact location of this bearing or the part number, it would be a very big help to me. TIA.

[sandmanmac]

Hello sir, hope you are well, I am having this kind of issue with MP C5502, done everything just like you did except about this bearing you mention. If you don't mind, may I know the exact location of this bearing or the part number, it would be a very big help to me. TIA.

Dude....this is an 11 year old thread relating to an entirely different machine!
Advice given and part numbers are not relevant here!
Start a new thread!

[Phil B.]

Dude....this is an 11 year old thread relating to an entirely different machine!
Advice given and part numbers are not relevant here!
Start a new thread!

+1

Sent from my SM-G960U using Tapatalk

[luca72]

I have had same on a mpc2500, had to take out the exit/eject section, dismantle it clean all the hard toner off the white plastic wheels, clean the sensor and re-attach the arm on the solenoid.

+1) indispensable work, add air blow exit sensor