Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Sep 2009
    Posts
    566
    Rep Power
    49

    Lanier LD320 scan to email issues

    Weird problem. Customer says names are picked at random to scan to. For example a scan to "Peter" might also go to "Paul" They say they are hitting the clear modes between scans when they scan one after another. Anyone hear of this before?

  2. #2
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,949
    Rep Power
    126
    So what's wrong with Mary?
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

  3. #3
    AutoMajical Resolutionist 2,500+ Posts
    Lanier LD320 scan to email issues

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,589
    Rep Power
    90
    Sounds like Mary hit clear/stop, not clear modes!
    Mystic Crystal Revelations

  4. #4
    Service Manager 1,000+ Posts
    Lanier LD320 scan to email issues

    nmfaxman's Avatar
    Join Date
    Feb 2008
    Location
    Albuquerque
    Posts
    1,706
    Rep Power
    68
    Set the scanner reset time to 30 sec.
    Print out the scan log that shows Peter +1.
    The guilty party will show on the printout.


    And I always put the toilet seat down.
    Yeah right.
    Why do they call it common sense?

    If it were common, wouldn't everyone have it?

  5. #5
    Service Manager 1,000+ Posts
    Lanier LD320 scan to email issues

    teebee1234's Avatar
    Join Date
    Jul 2008
    Location
    Atlanta, GA
    Posts
    1,671
    Rep Power
    58
    Sounds like an operation problem. You will probably never be able to duplicate it because I would bet the operator is fat fingering it or something. Some questions/suggestions are..

    • Are they using the quick dial list or the search function?
    • Have them check the current destination on the screen before they send, if there are up and down arrows next to the name, that means they have an additional destination programmed.
    • Is the 'clear modes' button flaky (you will need to test it yourself and see if it requires any extra pressure, sometimes the contact on the board goes south).
    • If you can determine/prove that it is going to an extra destination and only one name was selected then either try upgrading firmware (I've never heard of this problem being machine related though) or something weird is going on with their email server.

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Sep 2009
    Posts
    566
    Rep Power
    49
    Scan reset time set to 15 seconds. Customer says they hit the clear modes(yellow) after finishing one scan before going to next. I've never heard of this. Did a broad search on Ricoh site, Came back to check SP1012 in scan mode set to zero. I couldn't find this in Lanier manual, but will check anyway. I agree, I think it is customer, but they say "ITS NOT US". Any more thoughts?

  7. #7
    AutoMajical Resolutionist 2,500+ Posts
    Lanier LD320 scan to email issues

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,589
    Rep Power
    90
    It's never the customer...And their network never has issue's either!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Mystic Crystal Revelations

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here