Thanks: 0
Likes: 0
Dislikes: 0
I finally got some time to take another look at this. I borrowed a scan/print sd card from another dealer and tried it in my copier with the same result. It is in the bottom slot, this should be the correct slot. I did not notice this the first time I looked at this but checking the user tools menu I have copy, fax and scan but not print. Could this be a board problem? No SC codes are showing. I dont know where to go from here, any suggestions? Thank You
Scan but no print... gotta be a controller problem.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Could you be a little more specific please, what should I be checking for? Thanks
It means that the problem could lie with the controller itself. If you have a machine with a controller, try swapping it out and see if all the options start working.
gotcha....I'll try that tomorrow, Thanks
Reply With Quote
Bookmarks