Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 29
onegreatsteak
I have a Lanier LD 260c "Ricoh D014" Will do the color correction for copier under maintance but will not perform it for the printer section, will give a failed message and suggest I realign test printout.
Same copier has also had running trouble with keeping toner level correct in developer.
Developer has been replaced, latest firmware, copys look good.
-
-
you could try doing a forced toner refresh then trying the calibration again
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks