I m already setting touch screen adjustment save and exit is ok back to normal. And them i off the m/c and On the m/c steel touch screen lose foces problem. How to do it?
I m already setting touch screen adjustment save and exit is ok back to normal. And them i off the m/c and On the m/c steel touch screen lose foces problem. How to do it?
I would update the LCDC firmware and perform touchsreen adjustment the turn off the copier and on if it still same problem then replace the LCDC board.
good luck
Get your facts first, and then you can distort them as much as you please.
Replace the touch screen. It's a common fault on this model. B223 9900.
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
You need to replace the touchscreen, there is a known manufacturing defect that Ricoh is addressing by supplying updated ones to direct offices and dealers gratis. It's getting kinda late in the game to get them though, check your local office. Search the forums for this extensively queried subject (needs a sticky!).
replace the touch screen as mentioned and your problem will dissapear. just finished doing one B223 9900.
Clear Modes, 1, 9, 9, 3, Clear Stop x5. Screen adjust is #1, touch with a pointy but not sharp instrument on the circles as prompted and exit.
I will also have to change the 4 drums on this machine (mpc 2500),do i have to clear any kind of counter(like sharp,since i'm a sharp tech) and if so ,how do you clear those counter?
Thanks in advance.
Bookmarks