Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts Ikon Princess's Avatar
    Join Date
    Feb 2009
    Posts
    126
    Rep Power
    35

    MPC2500 what did I do?

    Ricoh MPC2500 had a service code for the fuser, no big deal. Get there take out fuser remove thermo switches (accidentally drop them twice) remove thermistor wipe it down put it all together, fire it up...Different fuser code related to thermistor connector. Now my age(or hair color) starts to show, go into service mode to clear the service code, go to SP5 go to SP5801( instead of SP5810, aaugh) clear scs (sc=service code in my brain at the time). Re-boot copier I get the same code. (STUPID ME!) go back into SP mode5801 clear engine,DOH. Fire it up again and get the same service code, dissassemble fuser and tighten connector for thermistor, reassemble fire it up, no more service code, but... Re-enter info on birth certificate now color registration is off and I can't get the machine to recalibrate, it says that it can't.


  2. #2
    Senior Tech 100+ Posts verderacer's Avatar
    Join Date
    May 2008
    Location
    Sunny Arizona
    Posts
    158
    Rep Power
    34
    3.3.5 COLOR REGISTRATION
    Line Position Adjustment
    The automatic line position adjustment usually is
    done for a specified condition to get the best color
    prints.
    Do the following if color registration shifts:
    Do “Auto Color Registration” as follows to do the forced line position adjustment.
    1. First do SP2-111-3.
    2. Then do SP2-111-1.
    To check if SP 2-111-1 was successful, watch the screen during the process. A
    message is displayed at the end. Also, you can check the result with SP 2-194-10
    to -12.

    Then check >

    4.1.3 LINE POSITION ADJUSTMENT RESULT
    SP2-194-010 to -012 (Line Position Adjustment Result: M, C, Y)
    This SP shows the number as a line position adjustment result on the LCD. It shows which
    color has an error (M, Y or C).

    If your getting errors then follow >

    4.5.2 LINE POSITION ADJUSTMENT
    When there are color registration errors on the output, do the line position adjustment as
    follows.

    All in the manual...
    Ricoh & Microsoft may pay the bills but Un*x saves my ass every day.
    MCSE/CCNE/ENS and other crap...

  3. #3
    Senior Tech 100+ Posts Ikon Princess's Avatar
    Join Date
    Feb 2009
    Posts
    126
    Rep Power
    35
    Thank you I will be doing a lot of reading this week-end I think.

  4. #4
    Senior Tech 100+ Posts verderacer's Avatar
    Join Date
    May 2008
    Location
    Sunny Arizona
    Posts
    158
    Rep Power
    34
    No prob... and just curious, are you in AZ also?
    Ricoh & Microsoft may pay the bills but Un*x saves my ass every day.
    MCSE/CCNE/ENS and other crap...

  5. #5
    Senior Tech 100+ Posts Ikon Princess's Avatar
    Join Date
    Feb 2009
    Posts
    126
    Rep Power
    35
    Nope, sunny CA here.

  6. #6
    Senior Tech 100+ Posts verderacer's Avatar
    Join Date
    May 2008
    Location
    Sunny Arizona
    Posts
    158
    Rep Power
    34
    For a moment there I thought you might have been somebody I used to work with...
    Ricoh & Microsoft may pay the bills but Un*x saves my ass every day.
    MCSE/CCNE/ENS and other crap...

  7. #7
    Senior Tech 100+ Posts Ikon Princess's Avatar
    Join Date
    Feb 2009
    Posts
    126
    Rep Power
    35

    Thumbs up

    Thank you so much, I read everything I could cram into my brain about this and you were dead on. Thank you so very much

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here