Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Senior Tech 100+ Posts
    RICOH Aficio MP C3500 Error Code SC 548 and 549


    Join Date
    Dec 2010
    Location
    Texas
    Posts
    236
    Rep Power
    18
    Found this on the Ricoh web site. It might help.

    Attached Files Attached Files

  2. #12
    Glorified Parts Swapper 100+ Posts ptrflrs's Avatar
    Join Date
    Dec 2010
    Location
    San Antonio
    Posts
    192
    Rep Power
    20
    Quote Originally Posted by sebreizh View Post
    I had the same problem. It was the ferite roller on fusing unit.
    True, you can replace the less expensive pm kit (PMB222160K) which includes the ferrite core or the whole fusing assy. (B2234021) which is about twice as much(@ $640 USD last I checked) or modify a p/n 402718 color printer fusing unit which is somewhere between the pm kit and the actual fusing unit. You will have to flip a couple of wires in the harness -no biggie, takes a few extra minutes but worth every penny...

    I work for one of (if not the biggest) ricoh dealerships in the US.

    jesus loves you! (everyone else thinks you're an assh*le)
    street cred: CompTIA A+ & Network+ Certified; Konica Minolta Gold Seal x2,
    Konica Minolta Outward ASSociate, Ricoh, Sharp, Lexmark trained

  3. #13
    Junior Member
    Join Date
    Feb 2009
    Posts
    6
    Rep Power
    0
    Quote Originally Posted by kopikat View Post
    first off all he needs to change the outter touch screen i have had a load of these going faulty ,they cost under a euro.then you can replace the sensors (to the left of the fuser as you look in from the side part no. gw020020) and reset the error
    There are modified sensors now available, which have a wider gap for the flags to go through P/N: AW020190
    Also I've had to reinforce the sensors in place with paper clips wound around them to stop them falling out as easily. Looks ugly, but does the trick.


  4. #14
    Junior Member
    Join Date
    Feb 2011
    Location
    manila
    Posts
    4
    Rep Power
    0
    hello to all - how to identify the thermistor wreckage?? without removing fusing unit??
    thanks


  5. #15
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,205
    Rep Power
    72
    There isn't a way, you've got to strip the fuser to see the thermistors in the first place. I suppose a mark on the belt or press roller would give away a damaged or heavily toner caked one.

    Computers are serious tools, Michael!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here