Hi Dear
I am facing fault in ricoh 270.machine panel button are in working order but machine not going in SP mode.if any body face this fault tell me.
Hi Dear
I am facing fault in ricoh 270.machine panel button are in working order but machine not going in SP mode.if any body face this fault tell me.
How to Enter the SP Mode1) Press the following keys in sequence. clear-1-0-7-clear/stop· Hold the (Clear/Stop) key for more than 3 seconds. Make sure that the keypads are working properly.
Nobody is perfect..
i believe i had this problem a long time ago but on another ricoh model. i had to replace control panel...
all keys are working properly and i am using the same procedure to enter in SP mode but failed.one day ago the SP mode is working but next day i on the copier machine SP mode not Working.I also Shocked how can this happened.total machine is in working order.all units are working properly only SP mode not working.Copier is 110v and i am using converter to use it on 220v.
Has SP mode lock been switched on accidentally?
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
Bookmarks