hey guys, im new in ricoh products and happened to run into a sc 305 error code could anyone please tell me how may I resolve it or deal with it
thanks
hey guys, im new in ricoh products and happened to run into a sc 305 error code could anyone please tell me how may I resolve it or deal with it
thanks
305 is not listed in my book, but 304 is a charge roller error.check the drum unit. If it's 395 that's a development bias error, check and reset the developer. Power off/on to clear both.
I've got a file of Ricoh Error Codes posted on one of my sites at:
Manuals 4 You - Free Feel free to buy something while you're there. (Baby needs a new pair of shoes)
Paul@justmanuals.com
well today went to the customer and the 395 code was there and after trying to reset de developer was still there and after a while code 402 came up and threw me off balance even more, i even put a new developer unit in the copier
SC402 could be directly related to the SC395 problem as both may occur if the high voltage board is faulty.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
Did you notice alot of toner inside the front cover? Those machines had problems with getting toner into the door switches that are just above the fuser. There was a bulletin on that I think but I'm not able to find it right now.
actually now that i think of it there was..
Props to Paper Jam! there was an issue with the switches and the wireing harness to them, chaffing. You should check them and the harness. Then check your transfer unit and the clutch for the transfer unit.
Mystic Crystal Revelations
Bookmarks