Hi Everybody,
according to you is it possibile to install SR790 finisher on a SP8100DN.
Our Pricelist do not allow this but we hope it's only a commercial issue.
Thanks for your help!
Vincenzo
Hi Everybody,
according to you is it possibile to install SR790 finisher on a SP8100DN.
Our Pricelist do not allow this but we hope it's only a commercial issue.
Thanks for your help!
Vincenzo
29 rouge unpair manque.... cous cous....
You need the SR3040 Finisher for this model.
Both point-to-point diagrams are for the finisher pretty much the same. I'm sure there's a reason for this incompatibility. I think the only way so see if it works is just connecting one (which is an expensive expiriment).
Thank you for you help tomorrow we'll try this we hope not to receive so many sc's
Sent from my HTC Desire using Tapatalk
29 rouge unpair manque.... cous cous....
Hi.
Not possible. I used sr 3040 finisher of sp8100 and now replace the printer with SP 8200th finisher is not the same.
Because the amount of the printer is not the same and bridge unit is not the same.
Ok, we tried without success.
After installation the machine won't work electrically.
BTW Thank you for your preciuos help.
Vincenzo
29 rouge unpair manque.... cous cous....
Bookmarks