I have this issue on the first copy intermittently, i have no idea help!
I have this issue on the first copy intermittently, i have no idea help!
If the prints are OK, I would think of a bad exposure lamp or a defective lamp stabilizer.
Both prints and copies
Hi there!
1.Check & clean the ID-sensors (right beneath the fusing unit)
2.Check & (if possible) change the transfercleaningunit.
Greetings...
Looks like a bad xfer cleaning unit
Don't take that toner with me!
This pattern is not in the print data, it gets cleaned off after the first copy, its as if the machine just decides that this pattern is part of the image, but only for the first copy, like there is an issue somewhere in image processing. If it were cleaning unit the image would stay, no?
I think the first copy is out of the RAM DIMM and subsequent copies are from the HD. I would reseat the DIMM or try a different stick.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Looks like the old problem on the AF1224 when the transfer cleaning didn't work for the first few copies. This looks like a MUSIC pattern. I wonder of the transfer cleaning blade is deformed and not cleaning this strip.
thanks guys i figure it was some sort of read pattern, ill try messing with the cleaning unit
Bookmarks