'Yield Question ...

[Brad A.]

Hi-

I\\\'m confused over different yield quotes for what I thought would
be the same toners.

Our Ricoh 3006 our Savin SDC 306E both have identical internals.
However, when I look for black toner carts for them, the Ricoh type K1\'s
(#887914) are shown with yields of 9600 per cart. The Savin type K1\'s
(#5418) are shown as yielding a little more than half that number per cart.
The Ricohs are supposed to have 220gm/ct, but I can\'t find a weight for
the Savins online.

Does Savin give you less toner per cart than Ricoh, or is there something
else going on that I\'m not seeing.

Thanks,
-brad a.

[eg101]

Toner yield is based on a Black-to-white ratio. Minolta, for instance, used to quote a 6% B/W ratio which is about equal to one short paragraph per page. Not very realistic but it looks good on paper.
Don\'t know for sure, but I suspect this is why the yield is different in the case you mention. One mfg. has a higher B/W ratio they use for toner yield.

[10871087]

I have been in the biz for a while and I still cant figure out why copiers (6%), fax (3.5%), and printer (5%) yields are measured differenty. There was an interesting article posted here befor the crash about Kyocera supporting a new international standard for B&W yields measurement.

I did some digging around the Mita website and forund the link. Maybe the board guys could post it again for us.

Any way, here it is:
http://www.kmaconnect.com/dnetpub/js...jsp?msid=13895

[Lance]

HP has a real good page full of info with a better explanation of what it all means.

http://www.hp.com/sbso/product/supplies/whybuy_iso.html

Check it out