Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    556
    Rep Power
    27

    savin 9965 w-542

    can't get rid of this one. initially the sr730 wasn't powered up but the machine worked. went back with main pcb for the sr730 and it came back. now the copier will not come to ready. the fuser lamps do not come on. I went back with the i/o interface bd and lvps and still doesn't come to ready 542 still. help appreciated t


  2. #2
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,207
    Rep Power
    72
    Stats and thermistors okay?

    Computers are serious tools, Michael!

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    556
    Rep Power
    27
    all good.


  4. #4
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,207
    Rep Power
    72
    Bit of an odd one. By I/O board do you mean BICU?

    Computers are serious tools, Michael!

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    556
    Rep Power
    27
    Input/output


  6. #6
    Technician
    Join Date
    Apr 2011
    Posts
    11
    Rep Power
    14
    Pull the fuser unit out of the machine and check the lamp wires in the back of the fuser. Make sure they did not get caught in the drive gear. I have to ask but did you clear the fuser fault by going into service and them shuting the machine off while it is in service to clear the fault. I have had the gears and the drive coupling cut the lamp wire. This also blew out the BICU board and the lvps.


  7. #7
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,207
    Rep Power
    72
    Christ it's been that long since I've seen one of these buggers I can't remember much about them. I'd go with the BICU board for a start, got a spare laying around?

    Computers are serious tools, Michael!

  8. #8
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    556
    Rep Power
    27
    Quote Originally Posted by TonerMunkeh View Post
    Christ it's been that long since I've seen one of these buggers I can't remember much about them. I'd go with the BICU board for a start, got a spare laying around?

    i'll go back with another bicu and fuser unit just in case. thanks t


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here