3025 Vsp/Vsg/Vsdp/Vt/Vts values are correct?

[ponto700]

Hi to all,

today i rebuild one pcu of 3025 (developer, drum, c.blade) and the counter print is excelent. but when i make one copy looks like the density is lower. i already force tonner, clean all mirrors but the result is the same.

here are the values:
vsp - 0.78
vsg - 3.66
vsdp - 3.78
vt - 1.82
vts - 2.09

are this values correct? or something is not good?

thanks in advance

[TonerMunkeh]

Can you not just fit a complete PCU type 1027 and switch SP5-912 on? Saves a lot of cocking about with the Russian.

[ponto700]

Can you not just fit a complete PCU type 1027 and switch SP5-912 on? Saves a lot of cocking about with the Russian.

believe that is much easier... but i do my work according with client. he dont want to pay for a new unit thats why i rebuild it.

[teebee1234]

If the counter prints are good then the issue is with the scanner. If you cleaned the mirrors of any filming and the transfer roller is clean/new, check the settings. Are you copying in text mode or text/photo? Try setting it to Text mode with Auto Image Density off and see if that improves it.

[ponto700]

teebee1234,

i have try that but i still have the same result. the transfer, mirrors all cleaned. i try to copy in text mode and photo mode but still have the same problem.
regards.