sc550 cleaning web

[bcxprint]

Have a ricoh 1085 got sc 550 changed the web, cleared the code still throws the sc550. changed the sensor still coding. Set the 1902 to 0% am I missing something?

[rsyarcia]

if the procedure on the manual cant reset the sc 550, print the smc then perform memory clear(engine). then input the smc data on the machine.just an idea.

[bcxprint]

do I dareadmit this? was clearing the wrong 19xx to 0%. lol... obviously in a hurry and it's only Tuesday! Thank you though,. BTW, thank God I didn't reset! The time it takes to reinput all those dam settings! ... always a bright side if you lok right?

[rsyarcia]

that's good!lol

[Mr. T]

Have a ricoh 1085 got sc 550 changed the web, cleared the code still throws the sc550. changed the sensor still coding. Set the 1902 to 0% am I missing something?

somewhere in SP 1902 you might have cleared web near end this will make it keep popping the sc550 code

[hossam]

Have a ricoh 1085 got sc 550 changed the web, cleared the code still throws the sc550. changed the sensor still coding. Set the 1902 to 0% am I missing something?

Enter SP mode then select pm counter then pats list for pm yield indicator then web cleaning roller>>> clear>>> switch off and on