ricoh 2027 still waiting

[tlc1234]

Ricoh 2027 display says please wait. after 20 min still says please wait. not going to ready state.

[rsyarcia]

maybe the HD, try to format it or replcae it with known good HD.

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com

[Jaxom]

You can test if it is a defective HD by disconnecting it (or so is my understanding). If it works without the HD, replace HD.

[wfinn]

You can test if it is a defective HD by disconnecting it (or so is my understanding). If it works without the HD, replace HD.

This is correct. You lose finishing and Duplex but it is a great way to test. If it is defective just go to your local computer store or wherever and its the PATA notebook size hard drives. If you order from Ricoh they have a huge upcharge on them.

[Pandy]

Or order from Hytec, they get their HDDs from Ricoh but charge much less.

[mikadonovan]

This is correct. You lose finishing and Duplex but it is a great way to test. If it is defective just go to your local computer store or wherever and its the PATA notebook size hard drives. If you order from Ricoh they have a huge upcharge on them.

I've had good luck with non-oem hdd's. I have yet to replace the twin drives like in a B222. From what I've read, that is a different animal. As far as your problem, these guys are right. hdd.