Thanks: 0
Likes: 0
Dislikes: 0
I just install a new color machine, i did all process from manual but i can't do ACC becouse black text barely see on page and the acc print page the black is grey actualy and i think that is the purpose i can't completed.The colour copy is fine but the black not.Any of u got this problem on a new machine >?
Make sure the black developer is pushed all the way in.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Check the PCDU BK and the ITB (Image Transfer Belt).
The ITB have a little laver that coult be faulty. You can see that lever when you open the front door above the waste bottle. (That lever lowers the black transfer of the ITB)
It could be damage in the transport
Thx for answering i will try again tomorrow and i will let u all know what will be next
During installation of the machine you have to place the lever on the release mechanism of the transfer belt.
Good call, Eric. The belt is always on the color.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Eric1968 on manual doesn't say anything like that but i will check that too.
On my post "laver" = lever (lol my english)Originally Posted by Eric1968
Eric: If that lever is not in the right place the front door do not close. True?
If the lever is installed and is not in the up position, the door wont close.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
So, If this is what is happening to his machine, the lever can only be broken ... Becouse the door close (otherwise the machine would not be able to print the ACC)
Reply With Quote
Bookmarks