Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts xordi69's Avatar
    Join Date
    Jun 2010
    Location
    barcelona
    Posts
    200
    Rep Power
    30

    Aficio 3245c scan position

    In aficio 3245c , makes white scan ok but then lamp goes 5cmm out of place, and make copies with this 5cm margin white. No sc code...
    Thanks and excuse my very bad english.

  2. #2
    Passing Duplication Xpert 1,000+ Posts cobiray's Avatar
    Join Date
    Mar 2008
    Location
    York, PA
    Posts
    1,200
    Rep Power
    45
    Does it happen from only the glass or also from the document feeder? Have you tried adjusting the starting scan position for the machine?
    the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
    Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
    Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

  3. #3
    Senior Tech 100+ Posts xordi69's Avatar
    Join Date
    Jun 2010
    Location
    barcelona
    Posts
    200
    Rep Power
    30
    Also by the document feeder. I d'ont try to adjust scan position, but de unadjust is more than 5cm, but i will try it and say the result to you, thanks

  4. #4
    no mercy... 50+ Posts claudioterrible's Avatar
    Join Date
    Oct 2008
    Location
    BUENOS AIRES
    Posts
    93
    Rep Power
    32
    hola compadre desde argentina te contesto en espaņol,es importante antes de tocar nada si cuando sacas una copia ,la misma sale desplazada(fuera de registro) ,o si "borra"esos 5cm .con el modo sp 4010 podemos ajustar el registro del scanner,los sp 4 son de registro de scanner,pero primero confirma si no es simplemente el registro de la alimentacion de papel,cualquier cosa avisame

  5. #5
    Senior Tech 100+ Posts xordi69's Avatar
    Join Date
    Jun 2010
    Location
    barcelona
    Posts
    200
    Rep Power
    30
    Problem solved, its a bad connection of the sannerboard, thank you cobiray
    Gracias por el interesClaudio, por lo visto era fallo de la connexion de la placa, repasaron soldaduras y ahora parece ok.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here