Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
Intermittent jamming DF2000 of MP1600.
Problem: Multiple feeding of DF 2000.
I have done so far:
Changed the pick up roller, feed belt, separation roller, torq limiter.
Cleaned sensors, lubricate gears.
Any comments would be a great help.
-
Technician
50+ Posts
- Rep Power
- 32
Re: Intermittent jamming DF2000 of MP1600.
I have had this problem before. It turned out to be the black plastic pick up roller holder. The holder had worn causing too much play on the belt, which resulted in intermittent jamming. If you remove the metal bar from the pick up roller and pick up roller holder, you should be able to see where the pick up roller holder has become oval.
-
Senior Technician
50+ Posts
- Rep Power
- 30
Re: Intermittent jamming DF2000 of MP1600.
could be a paper feed clutch sticking on and so multi-feeding. I have had this on a similar machine.
-
Trusted Tech
50+ Posts
- Rep Power
- 28
Re: Intermittent jamming DF2000 of MP1600.
kindly check the black plastic guide plate under the ADF near the white metal plate. usually it is broken or disaligned. I usually replaced it with new one. hope this helps.
-
Re: Intermittent jamming DF2000 of MP1600.
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks