Hi, I have a problem with AF1075 duplex, which is paper always jammed at duplex unit. I go to SP7-507 and show code 110, 112, 020 and 008. Anyone please help me. thank you.
Thanks: 0
Likes: 0
Dislikes: 0
AF1075 JAMMING at Duplex unit
Hi, I have a problem with AF1075 duplex, which is paper always jammed at duplex unit. I go to SP7-507 and show code 110, 112, 020 and 008. Anyone please help me. thank you.
Hi there!Originally Posted by msmy
First, check if the paper is the right direction in the cassetes.
Second, remove the cover of the ADU and check the clutch.
Greetings...
You cleaned the rollers in the duplex? Checked for paper fragments in the connector?
It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
bad paper feed unit clutches will cause this. seen it many times
Don't take that toner with me!
This model uses a a paper feed motor instead of clutches. Make sure your fuser components are fresh and no flat spots on the pressure roller.
NEVER ASSUME ANYTHING
My bad. you're right. was thinking a generation back. In that case, make sure the paper feed stations have not been contaminated with leaking developer from bad seals on the development unit, and check the gears with one way bearings in the feed stations also.
Don't take that toner with me!
Thank guys. I change with new duplex unit, It's work. However, the another machine (using problem duplex) have same problem as before. I cleaned all roller at duplex unit. But still not working...
Try changing the Duplex entrance sensor #AW010058. I had one where the duplex guides were shifting to SEF when I was running LEF paper. Not sure why the sensor effected it, but that's what fixed my problem.
Change the clutch located in duplex unit (AX20 0243 Magnetic Clutch -Model C1) with the gear AB01 1496 Gear - 32Z (Model C2),obviusly itīs only a gear without dc connector , leave it (the clutch connector ) alone...disconnected
Reply With Quote
Bookmarks