Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Jun 2009
    Location
    Dublin
    Posts
    10
    Post Thanks / Like
    Rep Power
    11

    Enhanced Locked Print NX - error J522

    Hi guys,
    I'm just trying to install ELP NX embedded on MPC3001 for testing purposes and i'm getting error J522 everytime i try to run the app. any suggestions?
    Do i need some trial license ?

    thanks!


  2. #2
    Senior Tech 100+ Posts Choro1dal's Avatar
    Join Date
    Jun 2008
    Posts
    158
    Post Thanks / Like
    Rep Power
    14

    Re: Enhanced Locked Print NX - error J522

    J522 is a licencing issue. You'll need to Activate and Store a license on the device with use of the Remote Manager.


  3. #3
    Technician MOSSY BOY's Avatar
    Join Date
    Aug 2010
    Location
    GLASGOW
    Posts
    10
    Post Thanks / Like
    Rep Power
    9

    Re: Enhanced Locked Print NX - error J522

    Hi,

    Have you done what Choro1dal suggests?,

    If you have installed and stored the licence using remote Manager there should be no issue.

    I have found that if you try to start ELPNX you get that error when in Extended features.

    Try reebooting the device, 99% of the time ELPNX will then start.

    You really need to make sure that the licence is installed and stored.

    Also try deactivate, unistall, reinstall, store etc for ELPNX app and licence.

    These apps can be tempremental.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here