Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 31
Enhanced Locked Print NX - error J522
Hi guys,
I'm just trying to install ELP NX embedded on MPC3001 for testing purposes and i'm getting error J522 everytime i try to run the app. any suggestions?
Do i need some trial license ?
thanks!
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: Enhanced Locked Print NX - error J522
J522 is a licencing issue. You'll need to Activate and Store a license on the device with use of the Remote Manager.
-
Technician
- Rep Power
- 28
Re: Enhanced Locked Print NX - error J522
Hi,
Have you done what Choro1dal suggests?,
If you have installed and stored the licence using remote Manager there should be no issue.
I have found that if you try to start ELPNX you get that error when in Extended features.
Try reebooting the device, 99% of the time ELPNX will then start.
You really need to make sure that the licence is installed and stored.
Also try deactivate, unistall, reinstall, store etc for ELPNX app and licence.
These apps can be tempremental.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks